Water quality
Water Softener vs. Water Filtration: What Does Your Home Need?
A water softener and a water filter solve different problems. A softener removes the hardness minerals that leave scale and spots. A filter is chosen for a specific concern, such as chlorine taste or what is in your drinking water. Many homes in San Diego County deal with hard water, so the question is often which one you need first, or whether you need both.

What does hard water actually do?
Hard water carries dissolved calcium and magnesium. It is not a health hazard, but it is hard on a home. Common signs:
- White crust on faucets and shower heads.
- Spots on glasses and shower glass.
- Soap and shampoo that do not lather well.
- Scale building up inside water heaters and appliances, which can shorten their life.
Your water provider’s annual water quality report lists hardness, so you can check before buying anything.
| Water softener | Water filter | |
|---|---|---|
| Main job | Removes hardness minerals | Reduces specific contaminants |
| Helps with | Scale, spots, soap lather | Taste, odor, sediment, drinking water |
| Typical setup | Whole-house | Whole-house or under-sink |
| Upkeep | Add salt | Replace cartridges or membranes |
How does a water softener work?
Most softeners use ion exchange. Water passes through a tank of resin beads that trade the hardness minerals for sodium or potassium. Every so often the system recharges itself using salt from the brine tank. Your main job is to keep that salt topped up.
A softener does not remove chlorine taste, odor or most other contaminants. That is what filtration is for. If you watch your sodium intake, ask about potassium-based options or about leaving a drinking-water tap unsoftened.
What does a filtration system do?
Filtration depends entirely on the filter. Carbon filters are commonly used to reduce chlorine taste and odor. Sediment filters catch sand and particles. Reverse osmosis (RO), usually installed under the kitchen sink, pushes water through a very fine membrane and reduces a wide range of dissolved substances in your drinking water. “A filter” on its own does not tell you what it removes, so always ask what a system is certified or designed to reduce.
Whole-house or under-sink?
- Whole-house systems treat water where it enters the home, so every tap, shower and appliance gets it. Softeners are almost always whole-house.
- Under-sink systems treat water at one faucet, usually for drinking and cooking. RO is typically installed this way.
- Plenty of homes use both: a whole-house softener or filter for the plumbing, and an under-sink RO for drinking water.
What maintenance should I plan for?
Softeners need salt. Filters need cartridges replaced on schedule, and RO systems need filter and membrane changes per the manufacturer. A filter left too long stops doing its job. Ask how often each part needs service before you choose a system, and keep the equipment accessible.
Quick answers
Frequently asked questions
Does a softener replace a filter?
No. A softener removes hardness. A filter is chosen for a different job. Many homes use both.
Do you install under-sink reverse osmosis systems?
Yes. San Diego Plumbing and Drain installs whole-house filtration, under-sink and reverse osmosis systems, and water softeners.
Can you service the system I already have?
Yes, we offer filter maintenance. Share the make and model and when it was last serviced.


